EasyManuals Logo

Honeywell CL15AC User Manual

Honeywell CL15AC
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
USE & OPERATION
LOW WATER ALARM FUNCTION
The unit is equipped with a low water sensor. When water in the tank is below the
minimum level, you will hear 10 beeps and the COOL LED indicator will flash
continuously. At the same time the power to the pump inside the unit will be cut off
to protect the life of the pump.
To disengage the alarm function, turn off and unplug the unit from the power
outlet, and fill the tank with water above the minimum level.
To turn off the alarm function and continue to use it in FAN mode, turn off the unit
and turn the unit on. If COOL button is pressed again without filling the tank with
water, low water alarm will activate again.
11
COOLER LOCAT I ON
Place the cooler in front of an open door or window. Ensure that
there is adequate cross - ventillation in the room by leaving a
door or window open opposite from the cooler.
Following these rules will ensure your cooler will work as
effectively as possible.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell CL15AC and is the answer not in the manual?

Honeywell CL15AC Specifications

General IconGeneral
Package depth410 mm
Package height845 mm
Package weight12300 g
Noise level- dB
Product colorGrey, Silver
Weight and Dimensions IconWeight and Dimensions
Depth380 mm
Width360 mm
Height795 mm
Weight9900 g

Related product manuals