Honeywell CL15AC User Manual

TROUBLESHOOTING GUIDE
No discharge of air Cord is not plugged in.
Make sure power cord is plugged
in and the supply switch in ON.
Power is not on.
Try to turn the unit ON by
pressing buttons on control
panel or remote control.
Not Cooling / Unit is
making noise
Pump is not turned ON.
Turn on COOL function from
remote or control panel.
Low or no water in tank,
when COOL is selected.
Refill water tank.
Damaged Pump or Calcium
deposits on blower.
Contact service centre.
PROBLEM POSSIBLE CAUSE SOLUTION
16
in and the supply switch in ON.
Make sure power cord is plugged
Cooler not operating Initially. Cord is not plugged in.
Power outlet or supply faulty.
Check the power outlet. Check
the power supply.
I ncorrect Voltage.
Check that the power supply is
the same as specified on the
rating label.

Honeywell CL15AC Specifications

General

Package depth	410 mm
Package height	845 mm
Package weight	12300 g
Noise level	- dB
Product color	Grey, Silver

Weight and Dimensions

Depth	380 mm
Width	360 mm
Height	795 mm
Weight	9900 g