TROUBLESHOOTING GUIDE
The unit does not respond Remote control batteries. Check batteries, Replace if
needed. Try to operate using
the control panel.
Damaged PCB
Try with remote control. If the
unit responds, PCB board
fasteners may be loose.
Contact service centre.
If neither remote control nor
control panel works, PCB
board may be damaged.
Contact service centre.
PROBLEM POSSIBLE CAUSE SOLUTION
17
Replace the honeycomb cooling
Old Unit. There may be an algae issue,
within a week of initial use.
odour, which will dissipate
cooling media will have an
first time, the Honeycomb
When the unit is used for the
Odour omission New Unit.
For product enquiry or support contact :
CUST OMER CARE : 1300 7108 60
media. Contact customer care.