FUNCTION KNOBS
USE & OPERATION
COOL
To begin cooling the desired area, turn the knob to the ON
position. The pump starts operating after turning the knob to
this postion. You will feel cooler air after the Honeycomb media
is completely wet.
FAN / POWER
The unit turns ON when the knob is changed to any of the
speed levels. This unit is provided with four options to vary the
speed of the fan. OFF -- H (High) -- M (Medium) -- L (Low)
Switch the knob between these 4 options to vary the speed of
fan. You can feel the change in airflow as you switch between
these option.
OFF ON
SWEEP
OFF
FAN
H
M
L
OFF
FAN
H
M
L
OFF
ON
COOL
OFF
ON
COOL
9