Power
Press the button to turn the unit on. The cooler will
start automatically at medium speed. After a few seconds the
speed will switch to low. To turn the unit off, press the button
again.
Speed
Press the SPEED button repeatedly and the speed will
change. The indicator light will show the selected speed. High
(Hi), Medium (Med), Low (Lo) & Sleep. The Sleep setting is
for comfort during the night; The cooler runs on High Speed
for 1 hour, Medium Speed for 1 hour, and then remains on
Low Speed continuously.
Cool
To begin cooling the desired area press the COOL button.
The indicator light will come on and the water pump will
operate. You will feel the cooler air after the Honeycomb
Cooling Media is completely wet.
9
USE & OPERATION
Function Buttons
COOL
SPEED