Honeywell CS071AE User Manual

120V - 60 Hz
Shock Hazard
Water Level Indicator
5
SAFETY
READ AND SAVE THESE INSTRUCTIONS:
When using electrical appliances, basic safety precautions should always be followed:
•
•
•
•
•
•
•
•
•
Your cooler runs on 120 Volt AC, 60 Hz current. Check the
household voltage to ensure it matches the appliance's rate
specification.
Before operating the product remove it from its packaging
and check that it is in good condition.
DO NOT operate any product with a damaged cord or plug.
We recommend not using an extension cord with this appli-
ance.
DO NOT run power cord under carpeting, or cover it with rugs
or runners. Keep the cord away from areas where it may be
tripped over.
Always unplug the product before refilling the water tank.
Always unplug the appliance from the power source before
cleaning, servicing or relocating the unit.
Remove the power cord from the electrical receptacle by
grasping and pulling on the power cord plug-end only, never
pull the cord.
DO NOT use the product in areas where gasoline, paint or
other flammable goods and objects are stored.
When using the ''COOL'' setting, check the water tank to
ensure that it is full. Operation of this cooler on the ''COOL''
setting with an empty tank may result in damage to the water
pump.

Honeywell CS071AE Specifications

General

Type	Monobloc mobile air conditioner
Timer type	Digital
Filter type	Carbon
Noise level	- dB
Variable power	Yes
Number of speeds	3
Water tank capacity	7 L
Cooling capacity (max)	- BTU/h
Timer duration (maximum)	7.5 h
Air conditioner functions	Cooling
Cooling capacity in watts (max)	50 W
Cooling capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	-
Hourly energy consumption (cooling)	- kWh
Product color	White
Suitable for room area up to	9 m²

Weight and Dimensions

Depth	396 mm
Width	244 mm
Height	665 mm
Weight	5900 g
Package depth	430 mm
Package width	270 mm
Package height	705 mm
Package weight	7000 g