Need help?Do you have a question about the Honeywell CT30 and is the answer not in the manual?
General| Model | CT30 |
|---|---|
| Type | Non-programmable Thermostat |
| Compatibility | Single-stage heating and cooling systems |
| Power Source | Battery (2x AA) |
| Accuracy | ±1°F (±0.5°C) |
| Temperature Range | 45°F to 90°F (7°C to 32°C) |
Steps to safely remove the existing thermostat from the wall.
Verify thermostat compatibility by counting wires connected to the old unit.
Label each wire with its terminal letter and carefully remove the old wallplate.
Securely install the new thermostat base to the wall.
Guidance for connecting wires when labels do not match terminal designations.
Adjust the internal lever to match your specific heating or cooling system type.
Complete the installation process after wiring and configuration.
How to adjust the lever to set the desired indoor temperature.
Instructions for turning off the heating system using the thermostat's lever.
To Next Page