Honeywell CW45 - About the User Interface and Applications; About the User Interface

CW45 Mobile Computer User Guide 11
Welcome Screen
The first time you power on the computer, a Welcome screen appears. You can
either scan a configuration barcode with the side-facing camera or use the Wizard
to manually set up the computer. To learn more about how to Scan Barcodes, see
page 42. To learn more about configuring multiple devices using Wi-Fi Staging, see
page 72.
During the manual setup process, follow the prompts on the screen as the wizard
has you:
• Set the default language.
• Set up the Wi-Fi network connections.
• Set the time, date, and time zone.
• Personalize (name) the computer.
• Set up security and privacy options.
Once you complete the initial setup, the Welcome screen no longer appears when
you power on the computer and Provisioning mode is automatically turned Off
(disabled). Scanning a barcode to install applications, certificates, configuration
files, and licenses on the computer is restricted when Provisioning mode is turned
Off. To learn more About Provisioning Mode see page 71.
Note: Out of the box, the F3 button has been remapped to Scan so that you can use a
configuration barcode during setup. For information on how to restore F3 to its
default (ENTER), refer to page 23.
Unlock the Screen
The screen lock automatically activates every time the computer is turned On or
when the computer wakes from Screen Timeout mode (sleep mode).
• Swipe up from the bottom of screen to open.
The level of security provided depends on the type of lock set (e.g., Swipe, Pattern,
PIN, or Password). The default setting (Swipe) provides no protection against
unauthorized access to your computer.
Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer after the screen lock activates,
unless they input the correct password, PIN, or pattern.