68 CW45 Mobile Computer User Guide
6. When the scanner is successfully paired with the computer, the scanner name
appears under Connected Device.
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge .
3. Tap the menu icon and then tap Disconnect BT Scanner.
4. Tap Honeywell or Intermec.
5. Scan the Disconnect Barcode displayed on screen.
About Ethernet and USB Communications
You can use these optional CW45 series accessories to transmit data to and receive
data from another device using an Ethernet or USB cable connection:
• Ethernet Home Base
Accessory documentation is available for download from the CW45 product page
at sps.honeywell.com.
To Next Page
Loading...
