CW45 Mobile Computer User Guide 71
Read an NFC Tag
To read an NFC tag, place the tag near the NFC antenna, close to the battery.
Note: NFC is On by default. To turn NFC On or Off, go to Settings >> Connected devices
> Connection preferences > NFC.
Developer Information
To download the Honeywell Mobility SDK for Android and EZConfig for Mobility:
1. Go to the Technical Support Downloads Portal at
https://hsmftp.honeywell.com.
2. Create an account if you have not already created one. You must login to
download the software.
3. Install the Honeywell Download Manager tool on your workstation (e.g., laptop
or desktop computer) prior to trying to download any files.
4. Navigate to the software:
• Honeywell Mobility SDK for Android
Click on Software > Software and Tools > Developer Library >
SDKs for Android.
• EZConfig for Mobility
Click on Software > Software and Tools > EZConfig for Mobility.
5. Select Download next to the software zip file.
About Provisioning Mode
Once you complete the out-of-box initial setup process, Provisioning mode is
automatically turned off to improve device security against unwanted
modifications to the system.
To Next Page
Loading...
