72 CW45 Mobile Computer User Guide
When Provisioning mode is turned off (disabled):
• Configuration barcodes do not scan and process.
• \honeywell\autoinstall folders are inaccessible.
Note: To learn more about network and security for Honeywell mobile computers with
Android operating systems, go to sps.honeywell.com.
Enable or Disable Provisioning Mode
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Provisioning mode.
3. Tap the button to toggle the provisioning On or Off.
About Wi-Fi Staging
You can use the Honeywell Wi-Fi Staging app to quickly set up new devices by
configuring one device and using it to stage others. Wi-Fi Staging can also be used
to enroll devices in a Mobile Device Management (MDM) system by connecting
units to a defined network and downloading and installing the MDM client app.
Once you have set up a configuration in the Wi-Fi Staging app on the server device,
Wi-Fi staging uses that device as a hotspot and waits for a client connection. The
configuration is distributed to the client device once communication is established
between the client and the server device.
Staging Devices
Wi-Fi Staging requires two steps:
1. Set up a master device to act as a server (see next section).
2. Set up the client device (see Set Up Client Devices on page 75).
Set Up a Device as a Server
Wi-Fi Staging provides two kinds of configurations for a master device acting as a
server through a hotspot. Setup of the server device differs based on the staging
configuration chosen:
• Basic Configs include the most common system settings:
• System language
• Bluetooth and NFC
• System volume
•Location
To Next Page
Loading...
