26
REMOTE CONTROL TF 26 DHC 23
■■
Connection for remote control TF 26
The most important function of the DHC 23 can be remotely controlled from the living
room with the comfortable remote control TF 26:
– Set setpoint for the room temperature
– Switch heating on or off
auto Heating and domestic hot water readiness are switched on corresponding
to the set switching times. The room temperature is reduced to the night
setpoint during the night (night shutdown).
The heating is on round the clock. Domestic hot water readiness is switched
on corresponding to the set switching times.
Heating is off. Domestic hot water readiness is switched on corresponding to
the set switching times.
Knob for the room temperature setpoint, effective only in the and auto
position of the TF 26 operating mode switch.
Setting range: –7 . . . +7 K
Mid position: 0 K
The setting of the remote control TF 26 is added to the setting on the DHC 23. For
instance, if 19°C is set as setpoint on the DHC 23 and +2 K on the remote control, then
an effective setpoint of 21°C results.
Connection of TF 26
to DHC 23
10878_BDA_DHC23_engl_neu 06.09.1999 13:51 Uhr Seite 28
To Next Page
Loading...
Need help?
General
