Staging Instructions Honeywell Dolphin 60s
Staging Manual Honeywell Dolphin 60s
7. Delete the superfluous files so that only the ones shown in the following illustration are
left to be seen:
8. Insert the now following files to the same register. You can finde them in the register:
https://mdesrv.lekkerland.com/mdm/sovia/Download/soviaMDMClient/ (for the
productive system) or under
https://mdetst.lekkerland.com/mdm/sovia/Download/soviaMDMClient/ (for the test
system) Always search for the most current versions according to the version number
here! (The registers are named after the version numbers)
9. Afterwards separate the connection of the device to the computer and only then proceed
with the following steps!
10. Please check the settings of the system time.
a. Leave the main menu of the Sovia Client via the red cross in the top right corner.
Then exit and confirm with „Ja“ (Yes).
To Next Page
Loading...
