Honeywell Dolphin 60s - Page 7

Staging Instructions Honeywell Dolphin 60s
Staging Manual Honeywell Dolphin 60s
Page/of Pages
7/11
f. If necessary, change the date and time settings to your current time(also time
zone).
g. Finish the settings with “OK” and return to the Windows menu by clicking on the
Windows button. Then return to the Client via the button “MDE” in the Windows
menu.
11. Carry out a so-called Clean-Boot. To do so, press the green and blue key (see following
picture) at the same time for 6 seconds.
12. On the Boot Screen (see following picture) please enter 1277. No new window will
appear for this. Just enter the code as soon as the according image section is shown.