3 - 11
The rubber door is required for 1) proper functioning of the SD card and 2) preserving the
environmental rating for water sealing. Do not remove the rubber door.
Note: Do not use the terminal when the access door is open. When this door is fastened securely and properly, the
memory interface is sealed against moisture and particle intrusion, read/write data is stored securely, and the
terminal’s environmental rating is preserved.
4. Tap the Power key to resume operation.
5. To verify that the operating system recognizes the new memory card, open Windows Explorer and
navigate to My Device\Storage Card.
To Next Page
Loading...
