Charge the Mobile Computer
The CT60 mobile computer ships with a partially charged
battery. Charge the battery with a CT50 Series charging device
for a minimum of 4 hours. Using the computer while charging
the battery increases the time required to reach a full charge.
CT60 mobile computers are designed for use with the following
CT50 Series charging accessories: HomeBase, Ethernet
HomeBase, ChargeBase, NetBase, Quad Battery Charger,
Vehicle Power Adapter, Vehicle Dock, and USB Adapter.
Before you attempt to use, charge, or replace the battery in
the mobile computer, carefully read all the information
under “Equipment for Use in Hazardous Locations”.
We recommend the use of Honeywell accessories and power
adapters. Use of any non-Honeywell accessories or power
adapters may cause damage not covered by the warranty.
Mise en garde: Il est recommandé d'utiliser les
périphériques, les cordons d'alimentation et les adaptateurs
secteur conçus par Honeywell. L'utilisation de tout
périphérique, cordon d'alimentation ou adaptateur secteur
d'une autre marque est susceptible de provoquer des
dommages non couverts par la garantie.
Ensure all components are dry prior to mating the computers
and batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
Mise en garde: Assurez-vous que tous les composants sont
secs avant de connecter les terminaux/batteries à des
périphériques. L'insertion de composants humides risque de
provoquer des dommages non couverts par la garantie.
We recommend use of Honeywell Li-ion battery packs. Use
of any non-Honeywell battery may result in damage not
covered by the warranty.