Honeywell Dolphin CT60 Series - Install the Battery

1
2
3
Install the Battery
The CT60 mobile computer ships with a Li-ion battery, manu-
factured for Honeywell International Inc.
Before you attempt to use, charge, or replace the battery in
the mobile computer, carefully read all the information
under “Equipment for Use in Hazardous Locations”.
Ensure all components are dry prior to placing the battery in
the computer. Mating wet components
may cause damage not covered by the warranty.
Warning: Battery must be locked when using the CT60 in a
hazardous environment.
AVERTISSEMENT: la batterie doit être verrouillée lors de
l'utilisation du CT60 dans un environnement dangereux.