15
About Provisioning Mode
After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a bar code to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.
Scan a Bar Code with the Scan Demo
Note: For optimum performance, avoid reflections by scanning the bar
code at a slight angle.
1. Swipe up from the bottom of the Home screen to access all
apps.
2. Touch Demos > Scan Demo.
3. Point the computer at the bar code.
4. Touch Scan on the touch screen or press and hold a Scan
button. Center the aiming beam over the bar code.
To Next Page
Loading...
Need help?
General