Honeywell DT7235T User Manual

Sensors TAMPER LOOP & HOLD UP SWITCHES
95
TAMPER LOOP
EMPS-75
20mm Diameter Recessed Contact with Terminals
• Complies with EN50131-1 (Grade 1, Class II)
• Standard gap: 20mm (3/4")
• Tamper Loop for added security
ALSO AVAILABLE:
EMPS-75W
– White
EMPS-75B – Brown
EMPS-85
Surface Mount Contact with Terminals
• Complies with EN50131-1 (Grade 1, Class II)
• Standard gap: 20mm (3/4")
• Tamper Loop for added security
ALSO AVAILABLE:
EMPS-85W
– White
EMPS-85B – Brown
EN50131-1
EN50131-1
HOLD UP SWITCHES
270R
Hardwired Hold-Up
Switch in plastic case
• Switch type: Plunger type DPDT
• Switch action: Selectable latching or
momentary
• Switch rating: 0.2A @ 30VDC max.
• Connections: four position 45˚ screw
terminal block for each output side
with EOL resistor splicing terminals
• Operating temp: 14˚ F to 140˚ F
• Listed for UL636 Hold-up alarm units
and systems
• Dimensions: 3-1/2" L x 2" W x 1-1/2" D
269SN
V-Plex Hold-Up Switch with
stainless steel cover
“polling loop only”
• Switch type: Plunger type DPDT
• Switch action: Selectable latching or
momentary
• Switch rating: 0.2A @ 30VDC max.
• Connections: four position 45˚ screw
terminal block for each output side with
EOL resistor splicing terminals
• Operating temp: 14˚ F to 140˚ F
• Listed for UL636 Hold-up alarm units
and systems
• Dimensions: 3-1/4" L x 2" W x 1-1/4" D
269R
Hold-Up Switch
• Double-pole double-throw contacts for
multi-notifications
• Switch design provides totally silent
operation
• Twin 45° screw terminals with EOL
resistor splicing terminal
• Adhesive pads for temporary
positioning prior to screw mounting
• Operating temp: 14˚ F to 140˚ F
• Listed for UL636 Hold-Up alarm units
and systems
• Dimensions: 3-1/2" L x 2" W x 1-1/4" D

Honeywell DT7235T Specifications

General

Brand	Honeywell
Model	DT7235T
Category	Accessories
Language	English