Honeywell EDA50K-1 User Manual

Chapter 1: Product Features of ScanPal50 Series EDA50K-X Terminal
User Guide for ScanPal50 Series Terminal
13
Icon Status
Battery power is 100% full
Battery power is 50% full
Battery power is too low. Replacing the battery right now.
The terminal has been connected to external power supply for charging.
Battery failure occurs. Please replace the battery. If the failure still exists,
please contact Honeywell technical support.
Power indicator on the upper left corner of the terminal shows the battery charging status. It
can also be used as system message indicator. For detailed setting methods, please refer to
http://developer.android.com/guide/topics/ui/notifiers/notifications.html.
Default power indicator description
Connect to
power supply
Indicator status Description
No Flashing amber (Orange) Battery power is less than 15% full
No No light Battery power is higher than 15% full
Yes
Stable amber
(Orange)
Battery power is between 0% to 60%
full
Yes Flashing green
Battery power is between 60% to 95%
full
Yes Stable green Battery power is higher than 95% full
Yes/no Flashing red Battery failure

Honeywell EDA50K-1 Specifications

General

Brand	Honeywell
Model	EDA50K-1
Category	Handhelds
Language	English