Need help?Do you have a question about the Honeywell Elster Jeavons S100 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Brand | Honeywell Elster Jeavons |
| Model | S100 |
| Enclosure Rating | IP65 |
| Humidity | 0 to 95% RH, non-condensing |
| Storage Temperature | -40 °C to +70 °C |
Instructions for installing the regulator into pipework, covering environment, pressure, cleaning, flow direction, connections, and vent lines.
Step-by-step guide on how to set the desired trip pressure for the slam shut valve.
Procedure for manually re-arming the slam shut valve after it has operated.
Steps to remove the OPSS assembly from the slam-shut body.
Step-by-step guide for rebuilding the slam-shut body after dismantling.
Detailed instructions for disassembling the slam-shut body itself.
Procedure for dismantling the Low/Medium Pressure Over Pressure Shut Off (LP/MP OPSS) assemblies.
Step-by-step guide for rebuilding the LP/MP OPSS assemblies.
Continuation of the rebuilding procedure for LP/MP OPSS assemblies.
Steps to dismantle the High Pressure Over Pressure Shut Off (HP OPSS) assembly.
To Next Page