EasyManuals Logo

Honeywell F100 Professional Installation Guide

Honeywell F100
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
MOUNTING
Visually check the installation and make sure that:
• Airflow is in the direction of the arrow on the media air filter cartridge.
• Turning vanes and transitions, if used, are properly installed.
• Joints in sheetmetal between media air filter and furnace are sealed.
• All sheetmetal connections are complete.
• Original furnace filter has been removed and blower compartment is cleaned.
When you have veried that checkout has been completed:
• Replace any access doors removed during the Installation or Checkout.
• Run the furnace or cooling system through one complete cycle to make sure the system operates as desired.
The media lter must be replaced when pressure drop across the media lter reaches 0.5 in. w.c. (0.1 kPa), or at
least annually. If the media air cleaner is installed downstream from an atomizing humidier or if the installation
includes both heating and cooling, more frequent replacement may be necessary. Clogged media must be
replaced promptly to avoid restricting airow and reducing efciency of the heating/cooling system. Record the
replacement date in the space provided on the replacement media lter.
Checkout
Maintenance
Specications
The specications in this publication do not include normal manufacturing tolerances; therefore, an individual unit may not exactly
match the listed specications. This product is tested and calibrated under closely controlled conditions, and some minor differences in
performance can be expected if those conditions are changed.
FC100A Efciency
Efciency Ratings: Based on American Society of Heating, Refrigerating and Air-Conditioning Engineers
Standard 52.2-1999. Efciency ranges are dened for small particles, E1 = 0.3 to 1.0 micron; medium particles
E2 = 1.0 to 3.0 microns; and large particles, E3 = 3.0 to 10.0 microns.
Initial Efciency: E1 = 32% at 492 FPM
E2 = 72% at 492 FPM
E3 = 96% at 492 FPM
Minimum Efciency Reporting Valve (MERV): 10 at 492 fpm.
Filter Media
Pleated for greater media capacity.
F100 Media Air Cleaner 68-0239EF—05
10

Other manuals for Honeywell F100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell F100 and is the answer not in the manual?

Honeywell F100 Specifications

General IconGeneral
InstallationDuct-mounted
Airflow Capacity2000 CFM
Voltage120V
ModelF100
Dimensions (H x W x D)20" x 20" x 4"

Related product manuals