GETTING
STARTED
Congratulations for selecting the Honeywell Media Air Cleaner for your home comfort system! The F100 Media
Air Cleaner captures and removes a signicant amount of the air-borne particles from the air circulated through
the high-efciency pleated media lter. The Media Air Cleaner easily mounts in any position within the return air
duct of any gas, oil, and electric forced warm air furnaces and to compressor cooling up to 5 tons. Additionally, it
requires no electrical connections or maintainence beyond periodic media lter replacement.
When Installing this Product...
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check the rating given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
How it Works
The lter in your F100 Media Air Cleaner is made up of a web of bers. As air passes through the Media Air
Cleaner, particulates such as dust, pollen, dander, mold, and bacteria collide with the bers in the lter and
become trapped. Meanwhile, the clean air is allowed to continue through your heating and cooling system and
into your home. The particle removal efciency of the F100 Media Air Cleaner can be found in the Specication
section of this manual.
What to Expect From Your Honeywell Media Air Cleaner
F100 Media Air Cleaner 68-0239EF—05
2
To Next Page
Loading...
Need help?
General
