Need help?Do you have a question about the Honeywell Galaxy 3-520 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Galaxy 3-520 |
| Category | Security System |
| Language | English |
Overview of the Galaxy alarm system keypad functions and features.
Description of the numeric keys used for code entry and option selection.
Explanation of the A and B keys for navigating options and viewing information.
Instructions to ensure the system is ready for setting and areas are clear.
Procedure for entering a PIN for user types 2.1 to 2.2 for system setting.
Procedure for entering a PIN for user types 2.3 to 3.6 for system setting.
How to select specific groups for setting as part of the routine.
Information on the time allowed to vacate premises after starting the setting routine.
Using MAX cards, tags, or fobs to set the system based on assigned options.
Operation requiring both PIN and MAX card entry for enhanced security.
Description of keyprox keypads with built-in card readers used for setting/unsetting.
Details on the system's approval for connection to the PSTN network.
Procedure for unsetting the system via the keypad after opening a FINAL door or activating an ENTRY zone.
Warning about activating zones outside the designated entry route.
How to enter the PIN within the entry time to avoid an alarm.
Steps to cancel an alarm and potential reset requirements.
Resetting the system after an alarm using a manager-level PIN.
Requirement for an engineer to reset the system after certain alarm types.
Using MAX cards to unset system groups, including group choice and dual focus.
Access to all system functions, restricted to authorized users.
Access to a selection of common system options for users.
Allows users to omit zones before setting the system for a single period.
Navigation within the QUICK MENU to select the Omit Zones option.
How to view zones that can be omitted from the system.
Process of marking a zone as omitted using the # key.
Completing the setting routine after selecting zones to omit.
Special handling for vibration zones when omitted, affecting all zones of that type.
Automatically omits open zones eligible for omission when setting starts.
How to activate the Forced Set option via the QUICK MENU.
Handling of zones that cannot be omitted, requiring them to be closed.
Controls the Chime mode, momentarily activating zones programmed for chime.
Turning the Chime mode ON or OFF using the QUICK MENU.
How the Chime mode functions when activated and when it is suspended.
Method for accessing and checking zone descriptions and current status.
Navigating the QUICK MENU to display zone details.
The unique four-digit address number used for zone identification.
Identifies the operation of a zone, such as INTRUDER or FIRE.
Provides a means to view and review system history events.
Accessing the most recent logged events via the QUICK MENU.
Details of events including setting, unsetting, and alarms, with time stamps.
Navigating the log by date to find specific events.
Progressively stepping through events for a selected date.
Opportunity to get a hard copy print-out of system details using a serial printer.
Navigating the QUICK MENU to choose print options.
Printing details of all system codes including user number and name.
Printing details of each zone, including address, function, and description.
Printing the entire system log, detailing events and timestamps.
Option to print all data, starting with user codes.
Information displayed if the printer is not connected or online.
Method for testing system zones to ensure correct operation.
Choosing between testing all zones or selected zones via the QUICK MENU.
Starting an immediate test of all valid zones in the system.
Process of selecting specific zones for testing.
How to abort or conclude the zone testing procedure.
Allows users to modify the system's time and date settings.
Navigating to the Time/Date option within the QUICK MENU.
Procedure for entering a new time in HH:MM format.
Procedure for entering a new date in DD/MM/YY format.
Adjusting the system clock speed to compensate for variations.
Enables managers to assign, modify, and delete user access codes.
Sub-menu for managing user PINs, access levels, and MAX details.
Sets notification period before user codes programmed for PIN Change expire.
Details on how the 32 groups are displayed and managed on the Galaxy 520.
Assigning a user to a single group for access, set, and unset operations.
Allocating users to multiple groups for collective access and operation.
Limiting MAX card/tag/fob operation to a single specified keypad.
How MAX function is activated when a card is held to a MAX reader.
Feature to clear or manage antipassback restrictions within a preset time.
Information regarding time changes relative to GMT and examples for Italy.
Viewing programmed times for timers and switching them ON or OFF.
Allocating up to 10 holiday periods with start and end dates.
Procedure to program start and end dates for holiday periods.
Type 3.6 users require group choice to enter Group Omit function.
Controlling access modes for remote servicing via phone line or similar.
Option for direct access using internal telecommunications.
Enabling a 40-minute access period for remote servicing software.
Initiating a call back to a preprogrammed telephone number for remote access.
To Next Page
