Honeywell Galaxy Flex 100 V3 User Manual

Communications [56] Galaxy Flex Installer Manual
140
ARC Notify [56.1]

 1 = Receivers
 
  1 = Receiver 1
  
   1 = PSTN
   
    1 = Destination – Enter phone no.
   
    2 = Format
    
     1 = DTMF
    
     2 = SIA
    
     3 = Microtech
    
     4 = Contract ID
    
     5 = SMS
   
    3 = Autotest
   
    1 = Start Time
   
    2 = Intervals
   
    3 = Int. Test
   
    4 = Account No.
  
   2 = GSM (see PSTN sub-menus)
  
   3 = GPRS
   
    1 = Destination – Enter IP Address and Port No.
   
    2 = Format (1 = SIA, 2 = Microtech)
   
    3 = Autotest
   
    1 = Intervals
   
    2 = Account No.
  
   4 = Ethernet (see GPRS sub-menus)
  
   5 = USB
  
   1 = Format (1 = Microtech)
  
   2 = Autotest (see Autotest in PSTN)
 
  2 = Receiver 2 
  
  3 = Receiver 3 
  
  4 = Receiver 4 
  
  5 = Receiver 5  Each one of these menu options
   has the same sub-menus options
  6 = Receiver 6  as 1 = Receiver 1
  
  7 = Receiver 7 
  
  8 = Receiver 8 
  
  9 = Receiver 9 



Continued on next page

Honeywell Galaxy Flex 100 V3 Specifications

General

Brand	Honeywell
Model	Galaxy Flex 100 V3
Category	Security System
Language	English