Assemble Zone [64] Galaxy Flex Installer Manual
174
13. Press A. Full Set Disabled is displayed.
14. Press #. Full Set Alarm is displayed.
15. Press esc. Status is displayed.
16. Press A. Setting is displayed.
17. Press ent to select this option. Begin Set Disabled is displayed.
18. Press B. Sets System Disabled is displayed.
19. Press #. Sets System Enabled is displayed.
20. Press esc. Setting is displayed.
21. Press A. Log is displayed.
22. Press ent to select this option. Log Disabled is displayed.
23. Press #. Log Entry/Exit is displayed.
24. Press #. Log 24 Hours
is displayed.
25. Press esc three times to return to 64=ASSEMBLE ZONES.
To Next Page
Loading...
Need help?
General
