Need help?Do you have a question about the Honeywell Granit XP 1991iSR and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | LED |
| Scanner type | 1D/2D |
| Linear (1D) barcodes supported | - |
| Optical sensor resolution (W x H) | 1280 x 800 pixels |
| Battery life | 14 h |
| Battery type | Built-in battery |
| Input voltage | 4 - 5.5 DC V |
| Battery capacity | 2450 mAh |
| Power source type | Battery |
| Power consumption (standby) | 0.6 W |
| Power consumption (typical) | 5 W |
| Bluetooth version | 4.2 |
| Operating frequency | 2400 MHz |
| Standard interfaces | Bluetooth, RS-232, USB |
| Connectivity technology | Wired & Wireless |
| Product color | Black, Red |
| LED indicators | Yes |
| Protection features | Electrostatic Discharge (ESD) protection, Shock resistant |
| International Protection (IP) code | IP67 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 192 mm |
|---|---|
| Width | 76 mm |
| Height | 100 mm |
| Weight | 405 g |
| Base dimensions | 102 x 245 x 60 mm |
Instructions for establishing a USB connection between the scanner/base and a computer.
Details on connecting the scanner via keyboard wedge interface to a PC.
Explains connecting the scanner via RS232 serial port to a PC or terminal.
Explains using predefined barcodes for quick scanner setup and interface configuration.
Configuration options for RS232 communication, including baud rate and data format.
Essential safety guidelines for handling and using lithium-ion batteries.
Procedure to reboot and relink the scanner to its base or access point.
Information on connecting the scanner to various Bluetooth-enabled devices.
Step-by-step guide for pairing the scanner with Bluetooth devices like PCs and tablets.
Describes how the host terminal validates data and provides feedback to the scanner.
Configuration options for scanner trigger behavior, including manual and toggle modes.
Procedure to restore the scanner to its original factory settings.
Restores the scanner to previously saved custom default settings.
Detailed technical specifications for the corded scanner models.
Comprehensive lists of AIM and Honeywell identifiers for barcode symbologies.
To Next Page