Need help?Do you have a question about the Honeywell Genesis 7580G and is the answer not in the manual?
General| Type | Fixed bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D/2D |
| Pitch reading angle | -70 - 70 ° |
| Motion tolerance (cm/s) | 200 |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Standard interfaces | USB, RS-232, RS-485, Keyboard wedge |
| Product color | Black, Silver |
| Input voltage | 5.5 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 2 W |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 80 mm |
|---|---|
| Width | 83 mm |
| Height | 150 mm |
| Weight | 340 g |
Instructions for connecting the scanner via various interfaces.
Steps for connecting the scanner using a USB interface.
Connect the scanner between the keyboard and PC.
Connect the scanner to a PC serial port using an RS232 cable.
Create and save custom scanner configurations using menu bar codes.
How to restore custom default settings or factory defaults.
Configure serial port parameters like baud rate, data bits, and parity.
Configure beeper and LED indicators for successful reads and errors.
Configure scanner for hands-free presentation scanning operations.
Step-by-step guide to adding prefixes or suffixes to scanned data.
Steps to create and save a new data format for scanned bar code output.
Understand the scanner's EAS tag deactivation zone and operation.
Capture an image using the scanner's hardware or software command.
Transfer captured images from the scanner to a host device.
Procedure to restore scanner settings to factory defaults and disable plugins.
Detailed technical specifications of the Genesis 7580g scanner.
Guide to diagnosing and resolving common scanner issues like power, reading, and display problems.
To Next Page
