Quantity Accessory (Item Quantity)
Humidifier Parts and Accessories
3 ft (0.93m)
Bypass ducting including:
6 in. (155 mm) diameter flexible duct Starter collar
Summer shut-off damper Duct tape
20 ft (6.2m) 18 gauge, two-strand thermostat wire
20 ft (6.2m) 1/4 in. (6.35 mm) OD feed water tubing
10 ft (3.1m) 1/2 in (12.7 mm) ID drain tubing
1 bag
Connecting and mounting hardware: Wire nuts (4)
No. 8 sheet metal screws (18) Drain tube clamp
Feed tube mounting clamps (6) Brass inserts (2)
Plastic compression rings (2)
1 H8908 Humidistat
1 bag
Saddle Valve Assembly:
Saddle valve and top clamp (1) Threaded bottom clamp (1) Bolts (2)
Rubber gasket (1)
Brass insert (1)
Plastic bushing (1)
Table 1. Required Accessories. (Continued)
To Next Page
Loading...
