Performance Series Network Video Recorder User Guide
32
Figure 3-8 Expanded PTZ Control Panel
Configuring PTZ Connection Settings
Before you can control a PTZ camera with the NVR, you must configure the PTZ connection
settings.
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/
HEN323*4/HEN321*4/HEN642*4/HEN643*4.
To configure the PTZ connection settings
1. Go to Main Menu ïƒ SETTING ïƒ SYSTEMïƒ PTZ, the following window is displayed:
Figure 3-9 System Setting – PTZ
2. Configure the following settings:
Channel: Select the channel (camera) for which you want to configure PTZ settings.
PTZ Type: Select Remote for the PTZ type. A remotely connected IP camera is connected
through the network.
3. Click Apply, and then click OK to save your settings and exit.
Configuring PTZ Functions
To Next Page
Loading...
Need help?
General
