Web Client Operation
161
Figure 12-27 HDD Interface
2. Refer to the following table to interpret the HDD information:
Table 12-6 HDD Information
Device Name Shows the name you have given the device.
Physical Position Describes the hard drive bay where the hard drive is installed.
Free Space Indicates the amount of free space remaining on the HDD.
Total Space Indicates the total capacity of the HDD.
Status Indicates the operating status of the HDD.
S.M.A.R.T. Indicates S.M.A.R.T (Self-Monitoring, Analysis, and Reporting
Technology) status.
3. Click HDD Time to view the time information for the selected hard disk.
4. In the list of HDDs, double-click a HDD to view more details, if necessary.
Configuration
This chapter includes descriptions about how to configuring the following:
• Camera setup
• Network setup
• Event settings
• Storage
• General settings, including the following:
• the device’s name and number
• the interface language
• the video standard
• what happens when the HDD is full
• the pack duration
To Next Page
Loading...