Performance Series Network Video Recorder User Guide
32
Figure 3-8 Expanded PTZ Control Panel
Configuring PTZ Connection Settings
Before you can control a PTZ camera with the NVR, you must configure the PTZ connection
settings.
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/
HEN323*4/HEN321*4/HEN642*4/HEN643*4.
To configure the PTZ connection settings
1. Go to Main Menu SETTING SYSTEM PTZ, the following window is displayed:
Figure 3-9 System Setting – PTZ
2. Configure the following settings:
Channel: Select the channel (camera) for which you want to configure PTZ settings.
PTZ Type: Select Remote for the PTZ type. A remotely connected IP camera is connected
through the network.
3. Click Apply, and then click OK to save your settings and exit.
Configuring PTZ Functions
To Next Page
Loading...