Playing Back Video
47
Note
• After you go to the mark management
interface, system needs to pause current
playback. System resume playback after you
exit mark management interface.
• If the mark file you want to playback has
been removed, system begins playback from
the first file in the list.
Slice Playback
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4.
For the large recording file, you can use the slice playback function to play the same file in
several sections at the same time. It is very convenient for you to find the video footages you
desire.
On the main menu, click Search, or right click mouse and then select Search. You will be
navigated to the window as shown in Figure 5-1.
On the right pane, select Slice in the dropdown list, and then select date, cameras and stream.
The slice playback interface is shown as below. Each section has a small triangle; you can
adjust it to set time.
Figure 5-5 Slice Playback
Select slice file.
• Click Playback, system playbacks from the first of current date by default.
• Click time bar, system playbacks from the time you click.
• Click , you can select on the file list.
To Next Page
Loading...