EasyManuals Logo

Honeywell HJ5CESWK0 User Manual

Honeywell HJ5CESWK0
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
4EN
INSTALLATION (CONTINUED)
2. Connect the hose to the rear exhaust outlet on the back of the unit. Slide-in the hose connector
then rotate clockwise until it is locked in place.
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
Hose:
Dia.5.9'' (15cm)
Length: 10.23'' to 47'' (26cm to 120cm)
Window Bracket Kit:
This window kit is designed to fit most standard sliding windows. If your window is outside of the
size parameters as outlined above, the window bracket can be cut shorter to fit by bringing it to a
nearby hardware store.
Horizontal Sliding Window Vertical Sliding Window
Part A:
Min. Length 19.7" (50 cm)
Part A + B:
Min. Length 19.7" (50 cm)
Max. Length 38.2" (97 cm)
Part B
+ =

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HJ5CESWK0 and is the answer not in the manual?

Honeywell HJ5CESWK0 Specifications

General IconGeneral
Typeportable
Operating Area Size775 square feet
Cooling Settings3
Seasonally Adjusted Cooling Capacity10000 british thermal units
Heaterno
Fan Speeds3
Fan Airflow Rate295 cubic feet per minute
Hosesingle
Remote Controlyes
Timeryes
Sleeping Modeyes
Energy Efficiency10

Related product manuals