Honeywell KS30E-60 - Installation Layout

GB
Honeywell GmbH 8 MU0H-1420 GE23 R0618
7. Reference Data for Hardness
Adjustment
Please test the water hardness and refer to 4.3 Setting the
hardness of blended water (see Chapter 3.6 Sub-Chapter 7.
too).
The specific hardness conversion chart for capacity is listed
in the last column.
3.4 Installation Layout
M3/°F capacity for
10 liter of
resin
d°H f°H ppm (mg/l)
5.6 10.0 100 5000
6.2 11.0 110 4545
6.7 12.0 120 4167
7.3 13.0 130 3846
8.4 15.0 150 3333
10.1 18.0 180 2778
11.2 20.0 200 2500
12.3 22.0 220 2273
13.4 24.0 240 2083
14.6 26.0 260 1923
15.7 28.0 280 1786
16.8 30.0 300 1667
17.9 32.0 320 1563
19.0 34.0 340 1471
20.2 36.0 360 1389
21.3 38.0 380 1316
22.4 40.0 400 1250
23.5 42.0 420 1190
24.6 44.0 440 1136
25.8 46.0 460 1087
26.9 48.0 480 1042
28.0 50.0 500 1000
29.1 52.0 520 962
30.3 54.0 540 926
31.4 56.0 560 893
32.5 58.0 580 862
33.6 60.0 600 833
KaltecSoft
KaltecSoft
min. 20 mm