To Next PageTo Next Page
Need help?Do you have a question about the Honeywell KaltecSoft KS30E Series and is the answer not in the manual?
General| Series | KS30E Series |
|---|---|
| Brand | Honeywell |
| Cooling System | Not applicable |
| Heating System | Not applicable |
| Frequency | 50/60 Hz |
Read manual carefully, familiarize with operating instructions, local standards, and technical specifications.
General safety warnings including electrical danger, cleaning agents, trained staff, and housing covers.
Specifies the Honeywell softener's design for domestic water softening and forbids all other uses.
Details technical specifications for the KS30E/KS301 softener, including connections, pressure, and operating parameters.
Provides further detailed specifications for the water softener models.
Details the standard delivery components of the Honeywell water softener with an overview diagram.
Explains the softener's display indicators and the function of control buttons like UP, DOWN, SET, RECHARGE.
Describes the initial display behavior upon power-up and prompts for setting time and hardness.
Step-by-step guide for setting the time of day, recharge time, and supply water hardness on the softener.
Covers national regulations, pressure requirements, and environmental conditions for softener installation.
Checklist for professional installation by a qualified fitter, covering packaging, filters, connections, and operator information.
Important points before installation, including warnings, positioning, special installations, and plumbing.
Provides conversion data for water hardness (dH, fH, ppm) and capacity for 10 liters of resin.
Diagram illustrating the physical layout and connections for installing the water softener.
Details the main components of the water softener, including servo motor, connections, and brine storage.
Guidance on connecting the water softener's inlet and outlet using supplied hoses or conventional fittings.
Instructions for connecting the drain hose, its placement, and considerations for length and frost protection.
Details on connecting the safety overflow hose to the brine tank, its routing, and placement requirements.
Information on the water softener's power supply via a low voltage plug-in transformer for safety and ease.
Instructions for filling the brine cabinet with salt and notes on salt usage for effective regeneration.
Notes that machines are factory set to produce soft water and how to adjust residual hardness.
Guidance on testing fresh water hardness using a kit and the importance of accurate measurement.
Step-by-step checklist for initial power-up, including connections, salt, drain, and leak checks.
Explains intelligent quantity-dependent regeneration based on average capacity and actual consumption.
Mentions optional disinfection feature for ion exchange resin during regeneration (KS30I-xx models).
Specifies using only salt tablets compliant with EN 973 for the water softener.
Explains the charge bar on the display, indicating remaining softener capacity since the last regeneration.
How to adjust time or settings during normal operation by pressing keys and using the SET button.
Describes how the system retains programming for a few hours during power loss and the need to reset time.
Explains the flow indicator on the display, flashing at one litre per pulse when water is flowing.
Instructions for cleaning the softener with a damp cloth and mild detergent, avoiding harsh chemicals.
Procedure for manually initiating regeneration, including 'Recharge Tonight' and immediate regeneration.
Instructions on refilling salt, including level checks, container cleaning, and salt usage monitoring.
Describes normal water level fluctuations and what to do if an overflow situation occurs.
Guide to testing and adjusting the blended water hardness using the blending valve and hardness tester.
Details regular checks operators must perform, including salt, water hardness, leaks, and cleaning.
Outlines operator duties for optimal functionality, water quality monitoring, and regular inspections.
Addresses replacing wearing parts, recommended annual servicing, and maintenance agreements.
Information on product disposal, electrical parts, and authorized WEEE recycling centers.
A checklist to diagnose and solve common problems like water hardness, leaks, power, and display errors.
Continues the troubleshooting checklist for common issues such as drain flow and display errors.
Provides an overview of the water softener's physical dimensions in millimeters with diagrams.
