-.
-.-.
-.
',)&'
Ready To Arm
Arm the system in Stay mode
Enter Code:
Cancel Quick Arm
231
564
0
897
Clear
5200-100-082-V0
Arm Night
2. Select the ”Arm Night”, then enter a valid User Code.
OR
If Quick Arm has been enabled, select the “Quick Arm” icon.
Note: If a valid user code is not entered or the Confirm icon has
not been selected within 10 seconds, the system returns to
the “security” screen and it will not be armed.
Armed Night Stay - Exit Now
Exit now
28 seconds
5200-100-126-V0
Phone
More
Message
Zones
Disarm Restart
10:18 AM June 8, 2010
System
3. The system beeps three times and announces “Armed Night
Stay Exit Now”. The exit delay screen is displayed. If
programmed the display counts down the time remaining in
the exit delay.
Armed Night Stay
5200-100-127-V0
Phone
More
Message
Zones
Disarm
10:18 AM June 8, 2010
System
4. At the end of the exit delay the system announces “Armed
Night Stay” and displays the “Armed Night Stay” screen.
If an invalid User Code is entered or if a valid user code has not been entered within 10 seconds, the system
will return to the “home” screen and it will not be armed.
To Next Page
Loading...
Need help?
General
