Honeywell LYNX Touch L5200 Series - Automation and Schedules

 





 ' 
General Information
&***@&B+.B*)* 
:5B9);&*8&:5B9) )&;7
2$*&8# * 1$&!**@5B9)&B+
+*81# * 2$&5B9)&.B&
 * !")"  '  )

Note: Switches, Thermostats, Locks, Water Valves, Tools, and Scenes options will only appear when Z-wave has been enabled.
Refer to the Home Automation Guide P/N 800-16091 for information regarding these features.

Schedules
!   &    &  *         :M
*     & &)* N5B9)O&);   &&@
&  @
Programming a Scheduled Function
5200-100-001-V0
Video
Notices
Traffic
Security
News
5-Day Forecast
2
68
35 1:
F
PM
October 1, 2013
Feels Like 71
Mostly Sunny
F
Automation
Ready To Arm
1. With the system in the disarmed state, select the
“Automation” icon from the Home Screen. The system
displays the first page of the Automation screen. Select the
select the “T” icon to advance to the second page of the
Automation screen.
5200-100-053-V0
Garage door setup
Tools
Rules
Schedules
Scenes
Ready To Arm
2. Select the “Schedules” icon. The system displays the
Scheduling screen.
Note: Rules 21-40 are only accessible through TotalConnect Service.
Ready To Arm
5200-100-117-V0
No items to display!
Add New
Delete
Edit
3. Select “Add New”. The system displays the scheduling
options screen.


