'
Rules
72$*&8# * 1$&!**@5B9)&B+
+*81# * 2$&5B9)&.B&
* !")" ' )
The following options are programmed in this section:
Programming Field Action
Rule 1 - 20:
Select Rule 1 -20 Note: Rules 21-40 are only accessible through TotalConnect Service.
Name: Name the device
Type: Select the output type
Action: Select the action required for the device
Start Zone Type: Select Zone Type to start event
Stop Zone Type: Select Zone Type to stop event
Start System Operation: Select System Operation to start event
Stop System Operation: Select System Operation to stop event
Zone Number Operation: Select Zone Number to trigger event upon fault, trouble or alarm as selected.
Programming Rules
5200-100-001-V0
Video
Notices
Traffic
Security
News
5-Day Forecast
2
68
35
1:
F
PM
October 1, 2013
Feels Like 71
Mostly Sunny
F
Automation
Ready To Arm
1. With the system in the disarmed state, select the “Automation”
icon from the Home Screen. The system displays the first
page of the Automation screen. Select the “T” icon to
advance to the second page of the Automation screen.
5200-100-053-V0
Garage door setup
Tools
Rules
Schedules
Scenes
Ready To Arm
2. Select the “Rules” button. The system displays the Rules
screen.
Ready To Arm
5200-100-059-V0
Rules 1
New
Edit Delete
Rules 3
New
Rules 5
New
Rules 2
New
Rules 4
New
Rules 6
New
3. Select a “Rules” key followed by the Edit button.
Note: Rules 21-40 are only accessible through TotalConnect
Service.
To Next Page
Loading...
Need help?
General
