Honeywell LYNX Touch Security System User Manual

– 48 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Automation
5100-100-007-V0
RulesSwitches
Schedules
Scenes
Locks
Tools
Thermostat
68
Ready To Arm
2. Select the “Rules” button. The system displays
the Rules screen.
Ready To Arm
5100-100-070-V0
Rules 1
New
Edit Delete
Rules 3
New
Rules 5
New
Rules 2
New
Rules 4
New
Rules 6
New
4. Select a “Rules” key followed by the Edit
button. The system displays a keyboard.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
Ready To Arm
5000-100-190-V0
A
Q
Z
S
W
L
OP
M
K
I
N
J
U
V
G
T
B
H
Y
C
F
R
X
D
E
Clear
Done
123!@#
ABC...
4. If desired you can enter a Rule Name. Select
the “Clear” key and then enter up to 13
characters of text.
Note: Select the “ABC…” key to switch the keyboard
between upper/lower case or the “123!@#” key to
switch to numbers.
5. Once you are finished, select “Done”. The
system returns to the Rules screen.
Ready To Arm
5000-100-188-V0
Name
Save
Type
Disabled
01
6. Select the “Type” button. Dependant upon what
features are programmed in your control the
system toggles between the following Types:
Disabled
Trigger Output
Scene
(displayed when Z-Wave has been enabled)
To Ph. 1 (Message to Phone 1)
To Ph. 2 (Message to Phone 2)
To Ph. 1 & 2 (Message to Phone 1 & 2)
Email 1
Depending upon the Type selected, the system
displays several new programming fields.

Honeywell LYNX Touch Security System Specifications

General

Brand	Honeywell
Model	LYNX Touch Security System
Category	Security System
Language	English