Honeywell LYNX Touch Security System User Manual

– 49 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Automation
Ready To Arm
5000-100-189-V0
Name
Save
Type
Trigger Output
01
Start Zone Type
Not Used
Start System Operation
Not Used
Action
None
Stop Zone Type
Not Used
Stop System Operation
Not Used
OR
Ready To Arm
5100-100-071-V0
Name
Save
Type
Scene
Scene
Zone Type Fault
Not Used
System Operation 1
Not Used
Action
None
Zone Type Restore
Not Used
System Operation 2
Not Used
7. Select “Action”. Dependant upon the Type
selected previously, the system scrolls between
several options:
None
Permanent On
On for 2 sec
Pulsing
Send
Run Scene
8. Select “Start Zone Type” or “Zone Type Fault”
(if “Scene” was selected in Type field). The
system displays the following options
(dependant upon the Type that was selected):
Not Used Entry Exit 1
Entry Exit 2 Perimeter
Interior Follower Day / Night
24 Hour Silent 24 Hour Audible
Use the “S” “T” buttons to scroll to second
page of zone type options.
Silent Burglary 24 Hour Auxiliary
Interior With Delay Fire No Verification
Carbon Monoxide Trouble
No Response Arm Stay
Use the “S” “T” buttons to scroll to third page
of zone type options.
Arm Away Disarm
Monitor Resident Monitor
Resident Response General Monitor
General Response

Honeywell LYNX Touch Security System Specifications

General

Brand	Honeywell
Model	LYNX Touch Security System
Category	Security System
Language	English