Honeywell MAGICSTAT 3355 - Page 16

16
69-1012
A quick guide for operating or making changes follows:
NOTE: System switch must be set to Heat or Cool to perform the following.
Temporarily Change temperature
for current period only — press ; TEMPORARY indicator
shows on display; canceling itself at the next scheduled change, or to cancel sooner press .
Hold a temperature indefinitely (such as when on vacation)— press , then press ;
HOLD appears on the display; to cancel, press .
Check Current Temperature Setting— press . (When using TEMPORARILY CHANGE or
HOLD, pressing this cancels your change.)
Present
Setting
Warmer
Cooler
M1 00A
Hold
Temp
p
Warmer
Cooler
M1 00A
Run
Program
Run
Program
Temp
Temp