Honeywell MIWI350 - Page 4

10
4
06
07
08
09
11
For a fresh Lead-Acid Battery, the No Load Voltage is expected to be between 12.5–13.5VDC.
WARNING: Please perform the No Load Battery Voltage measurement in an area rendered
Non-Hazardous. Please Exercise Caution to ensure the Battery Terminals do not come in
contact in any metal other objects during the measurement/handling.
Configure modem/EC/ERX350/HMI settings
(For more information, refer MIWI350 Installation and Operational Manual - FD-610)
(-cw)
(+cw)
check
Battery Installation