Honeywell MM Series - Installation Continued; Connecting Hose and Window Bracket

4EN
INSTALLATION (CONTINUED)
3. Connect the exhaust hose to the rear exhaust outlet on the back of the unit. Push-in until it is
locked in place.
4. Connect the window bracket to the opposite end of the exhaust hose. Ensure that all connections
are tight and installed properly.
5. Connect the window bracket to the window.
6.
The Portable Air Conditioner is now ready to use.
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
Exhaust Hose:
Dia. 5" (12.7cm)
Length: 12" to 47" (30cm to 120cm)