Honeywell MP10CESWW User Manual

Honeywell MP10CESWW

56 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OWNER’S MANUAL

Read and save these instructions before use

MANUAL DEL PROPIETARIO

Lea y guarde estas instrucciones antes de usar la unidad

MODE D'EMPLOI

Lire et conserver ces instructions avant utilisation

Voltage rating / Tensión / Tension nominale: 115V~60Hz

Power rating / Potencia / Puissance nominale: 1050W

Portable Air Conditioner

Aire Acondicionado Portátil

Climatiseur Portatif

Model / Modelo / Modèle: MP10CESWW

For product inquiries or support / Para consultas del producto o soporte /

Pour les questions sur les produits ou pour du soutien:

www.honeywellportableac.com

Customer Support / Atención al cliente / Soutien au client:

USA: 1-800-474-2147 CANADA: 1-888-209-0999

Made in China

Hecho en China

Fabriqué en Chine

Questions and Answers:

A
Aaron SerranoJul 27, 2025
Why Honeywell MP10CESWW Air Conditioner runs but no cooling?
- K
  Kevin MooreJul 27, 2025
  Your Honeywell Air Conditioner might run without cooling due to several reasons. A door or window may be open, the air filter could be dirty, or the exhaust hose might be detached. Also, the temperature setting could be too high, or the air outlet/intake could be blocked. To resolve this, ensure all doors and windows are closed, clean the air filter, reinstall the exhaust hose properly, reduce the temperature setting on the control panel, and remove any blockage from the air outlet or intake.
J
Jeffrey ContrerasAug 3, 2025
What to do if my Honeywell Air Conditioner does not start?
- F
  Frederick RiveraAug 3, 2025
  If your Honeywell Air Conditioner isn't starting, there could be a few reasons. First, check for power. Then, replace the remote control batteries. Also, remove and reconnect the power cord and reset the safety LCDI plug. If the problem persists after these steps, contact customer support.
M
Mark BlairAug 10, 2025
Why my Honeywell Air Conditioner runs a short while only?
- L
  Laura BarreraAug 10, 2025
  If your Honeywell Air Conditioner runs only for a short time, it could be because the thermostat temperature setting is too close to the room temperature. Try lowering the set temperature. Also, check if the air outlet is blocked and ensure the exhaust hose is properly connected, making sure there are no tight bends in the air exhaust hose.
L
Lisa HuntAug 18, 2025
What to do if Honeywell Air Conditioner will not run and water full indicator light is ON?
- C
  Corey SmithAug 19, 2025
  If your Honeywell Air Conditioner won't run and the water full indicator light is on, it means there is excess water condensation inside the tank. You need to drain the water, referring to the section on Water Condensation Drainage for instructions.

Honeywell MP10CESWW Specifications

General

Brand	Honeywell
Model	MP10CESWW
Category	Air Conditioner
Language	English

Summary

Thank You

User Tips

Pre-Operation Stabilization

Place unit upright for 20 minutes before first use to stabilize refrigerant.

Safety Precautions

General Safety Warnings

Essential warnings for safe operation, handling, and maintenance of the appliance.

Parts Description

Unit Components and Installation Kit

Lists and illustrates the main unit parts and the included installation kit components.

Installation Guide

Exhaust Hose Connection

Steps for connecting the exhaust hose to the unit and window bracket.

Installation Guidelines

Exhaust Hose Best Practices

Guidelines for exhaust hose length, bends, and unit placement for optimal airflow.

Use and Operation

Control Panel Functions

Explanation of the unit's control panel buttons and indicators.

Remote Control Operation

Remote Battery Installation

Cleaning and Maintenance

Routine Cleaning and Storage

Procedures for cleaning the air filter, unit, and preparing for seasonal storage.

Water Condensation Drainage

Drainage Methods

Explains manual and continuous drainage procedures for excess water.

Troubleshooting Guide

Technical Specifications

Service and Warranty

Warranty Terms and Coverage

Details the 5-year limited warranty, exclusions, and conditions.

Customer Support and Claims

Related product manuals

Preview: Honeywell MN12CES

Honeywell MN12CES

Preview: Honeywell MM14CCS

Honeywell MM14CCS

Preview: Honeywell MN10CES

Honeywell MN10CES

Preview: Honeywell MN4CFS0

Honeywell MN4CFS0

Preview: Honeywell MM14CHCS

Honeywell MM14CHCS

Honeywell MO08CESWK

Preview: Honeywell MF08CESWW

Honeywell MF08CESWW

Honeywell MN10CESWW

Preview: Honeywell MO Series

Honeywell MO Series

Honeywell MN12CHESWW

Preview: Honeywell MO08CESWS6

Honeywell MO08CESWS6

Honeywell MN10 Series