11
1 Touch Menu.
2 Select Installer Options.
3 Enter password (date code) and
touch Done.
4 Select Wireless Device Manager.
5 Select Add Device to display the Add
Device screen. The thermostat is now
in listening mode.
NOTE: Accessories must be at least
2 feet away from the EIM during the
linking process.
5a Press and quickly release the
CONNECT button on each new
RedLINK accessory.
5b After a short delay (up to 20
seconds), check thermostat to
confirm the connection of each
RedLINK accessory.
5c Touch Done at the thermostat
after all new RedLINK
accessories are connected.
NOTE: Thermostat displays a
countdown timer while in listening
mode. If it detects no activity for 15
minutes, it exits listening mode.
Linking RedLINK accessories to the thermostat
Installer Op�ons
Done
Wireless Device Manager
Add Device
Listening mode
Listening mode
Done
To Next Page
Loading...
