7
3.1 Install batteries in RedLINK
accessories.
• Portable Comfort Control
• Wireless Outdoor Sensor*
• Wireless Indoor Sensor*
• Wireless Entry/Exit Remote*
• Wireless Vent and Filter Boost
Remote*
* Requires setup. See Installer
Setup options in Step 4.5.
3.2 Connect gateway to internet and
connect to power.
3.2a Connect RedLINK Internet
Gateway to router or modem
with Ethernet cable (RJ45).
3.2b Connect gateway’s power cord
to an electrical outlet that is not
controlled by a wall switch.
3
Powering optional RedLINK accessories
Thermostat
Wallplate
2.5 Mount thermostat on
wallplate.
Align thermostat to wallplate
and snap into place.
R
C
3.2a
3.2b
To Next Page
Loading...
