Installation Guide, Document 9
Mechanical
Environment
Warranty
Honeywell Security warrants the product is free from defects in material and work-
manship under normal use and service with proper maintenance for one year from
the date of factory shipment. Honeywell Security assumes no responsibility for
products damaged by improper handling or installation. This warranty is limited to
the repair or replacement of the defective unit.
There are no expressed warranties other than set forth herein. Honeywell Security
does not make, nor intends, nor does it authorize any agent or representative to
make any other warranties, or implied warranties, and expressly excludes and dis-
claims all implied warranties of merchantability or fitness for a particular purpose.
Returns must be accompanied by a Return Material Authorization (RMA) number
obtained from customer service, and prepaid postage and insurance.
Liability
The Interface should only be used to control exits from areas where an alternative
method for exit is available. This product is not intended for, nor is rated for opera-
tion in life-critical control applications. Honeywell Security is not liable under any
circumstances for loss or damage caused by or partially caused by the misapplica-
tion or malfunction of the product. Honeywell Security’s liability does not extend
beyond the purchase price of the product.
Dimension: 4.25 in. (108 mm) W x 2.75 in. (70 mm) L x 1 in. (25.4 mm) H
Weigh 4 oz. (120 g) nominal
Temperature: -55 to +85 °C, storage,
-40 to +75 °C, operating
Humidity: 5 to 95 % RHNC
To Next Page
Loading...
Need help?
General
