Honeywell QuietClean HHT-215 series User Manual

QuietClean_OM.qxd 3/5/09 10:00 AM Pa 5
OPERATION (HHT-215, HHT-217, HHT-219)} (continued)
Dual UV Lamp Operation
e Press the UV button (UV) to turn the Lamps on or off
(Fig. 4).
+ The Lamps will light and you will see a faint blue glow along
the front of the unit above the grille.
© The display will say "UV" in the bottom row.
NOTE: Removing the ifD™ filter assembly or turning the unit off
will cancel the UV Lamp function.
OPERATION (HFD-010) |
¢ Ensure the unit is in the OFF (0) position and then plug into a
working outlet.
+ Rotate the control knob to the desired speed level: High (3) or
Low (+) (Fig. 5).
e The indicator light will illuminate when the power is on.
e Turn the control knob to the Off (0) position to turn off the
air purifier.
‘OPERATION (HFD-015, HFD-110, HFD-112, HFD-116)
» Press the Power (>) button once. The unit will automatically
start at medium power (Fig. 6).
® Select a power level by pressing one of the three power level
buttons: High ($), Medium (:) or Low (+) (Fig. 7}. The indicator
light above the selected button will illuminate.
+ Press the Power button again to turn off the air purifier.
Timer Operation
* Press the Timer (© ) button to select 4, 8 or 12-hour operation
(Fig. 8). The timer indicators will illuminate to reflect the
selected time. The air purifier will automatically turn off when
time runs out.
è The timer can be turned off by repeatedly pressing the Timer
(©) button until all of the timer indicator lights go out.
NOTE: Removing the ifD™ Micro-filter assembly or turning the
unit off will cancel the Timer function.

Honeywell QuietClean HHT-215 series Specifications

General

Brand	Honeywell
Model	QuietClean HHT-215 series
Category	Air Cleaner
Language	English