Honeywell RCWL300A User Manual (English)

Questions and Answers:

D
David DavidJul 26, 2025
Why is the range reduced on my Honeywell Household Appliance?
- C
  Christopher KirkJul 26, 2025
  The range of your Honeywell Household Appliance might be reduced due to several factors. Metal structures like uPVC door frames can interfere, so avoid mounting the push or chime near them. Radio interference from other equipment, as well as walls and ceilings, can also diminish the range. Weak batteries are a common culprit; replace them every 12–18 months, or more often in cold conditions (below 41ºF [5ºC]).
A
Allison RojasJul 31, 2025
What to do if Honeywell Household Appliance chime does not work?
- D
  Drew MorrowJul 31, 2025
  If your Honeywell Household Appliance chime isn't working, first ensure you're using the correct batteries: LR6 ‘AA’ alkaline cells only. Next, verify the batteries are installed with the correct polarity. Finally, the chime may be out of range; try moving it closer to the bell push to see if that resolves the issue.
R
Robyn SmithAug 4, 2025
Why is the amber light flashing on my Honeywell RCWL300A?
- E
  Erin FarmerAug 5, 2025
  If the amber light is flashing on your Honeywell Household Appliance, it indicates that the chime battery is low. Replace the batteries with new LR6 ‘AA’ alkaline batteries.
C
Collin HallAug 9, 2025
What to do if the amber confidence light does not turn on Honeywell Household Appliance?
- J
  James BensonAug 9, 2025
  If the amber confidence light on your Honeywell Household Appliance bell push doesn't turn on or is only on briefly when operated, try fitting a new CR2032 battery.
K
Kathleen MelendezAug 15, 2025
What to do if I hear two beeps after the chime sound on my Honeywell RCWL300A Household Appliance?
- B
  Brandon PerezAug 15, 2025
  If you hear two ‘beep’ sounds after the normal chime sound on your Honeywell Household Appliance, fit a new CR2032 battery.
D
Dylan MyersAug 20, 2025
How to fix a beep sound in learn mode on a Honeywell Household Appliance?
- J
  Joanne ReedAug 20, 2025
  If you hear a ‘beep’ sound in learn mode on your Honeywell Household Appliance, it means the push you are programming has already been learned by the chime. If you want to change the icon associated with the push, use the un-learn procedure, then program the push again.

Honeywell RCWL300A Specifications

General

Type	Wireless Doorbell
Power Source (Receiver)	Plug-in
Power Source (Transmitter)	Battery
Range	150 feet
Volume Control	Yes
Chimes	Yes
Display	No
Programmability	No
Power Source	Battery
Compatibility	Compatible with Honeywell
Dimensions	4.5 x 2.5 x 1.5 inches
Weight	0.5 lbs